Indonesia’s high-rise and signage growth runs on aluminium composite panels — and the right color coated aluminum coil supplier for Indonesia balances value pricing with genuine PVDF quality for façades. As a factory-direct pre-painted aluminum coil supplier in China with 15+ years of export experience, ChinaCNU Steel ships PE and PVDF color coated aluminum coil to Indonesian ACP manufacturers through Tanjung Priok (Jakarta) and Tanjung Perak (Surabaya). Full RAL, metallic and wood-grain finishes, ISO 9001 quality, flexible MOQ. (Lebih suka Bahasa Indonesia? Lihat halaman Koil Aluminium Berlapis Warna.)
Why Indonesia’s ACP Market Needs Reliable Color Coated Aluminum Coil
From office towers, malls and shopfronts to signage and interior cladding in Jakarta, Surabaya, Bandung and Medan, aluminium composite panels are widely used across Indonesia’s construction sector. The market spans economical PE panels for signage and interiors and premium PVDF panels for exterior façades facing humid tropical and coastal-salt conditions. A dependable color coated aluminum coil supplier for Indonesia must serve both — cost-competitive PE coil and genuine Kynar 500 PVDF — with the flatness and adhesion ACP lines require. Our roll-coated coil covers the full range with consistent gloss and shade.
Specifications for the Indonesian ACP Market
| Item | Specification |
|---|---|
| Substrate Alloy | 1100, 3003, 3105, 5005 |
| Skin Thickness | 0.21, 0.25, 0.30, 0.40, 0.50 mm |
| Coil Width | 1220, 1250, 1500, 1570 mm |
| Coating | PE (signage/interior) & PVDF Kynar 500 (façade) |
| Coating Thickness | PE 18–25 µm; PVDF 25–35 µm |
| Finish | Solid RAL, metallic, mirror, wood & marble grain |
| Standard | EN 1396, ASTM, GB/T 17748 |
Value-segment 0.21–0.30 mm PE for signage/interior; premium 0.40–0.50 mm PVDF for façades. MOQ typically 3–5 tons per color/spec.
Why ChinaCNU Steel Is the Preferred Supplier for Indonesia
As an ISO 9001:2015 certified pre-painted aluminum coil supplier in China, we help Indonesian ACP makers compete on price and quality. Our factory-direct FOB Tianjin pricing in USD is keenly competitive, our genuine Kynar 500 PVDF meets façade specifications, and we offer full RAL plus metallic and wood-grain finishes with tight coil-to-coil shade control. Panel-width coils (1220–1570 mm) cut trim loss; we provide mill test certificates, SGS-tested adhesion/T-bend/MEK/salt-spray, support L/C and T/T, and load mixed containers. Short Asian shipping lanes keep lead times tight.
Shipping to Indonesia
We ship from Qingdao to Tanjung Priok (Jakarta), Tanjung Perak (Surabaya) and Belawan (Medan). Sea transit is roughly 10–18 days. We quote FOB Tianjin or CIF, with protective surface film, edge protectors and wooden pallets to keep the painted finish flawless.
Frequently Asked Questions
Can you supply both economy PE and premium PVDF?
Yes — PE for signage/interior ACP and genuine Kynar 500 PVDF for exterior façade ACP, often in the same order.
What coil widths suit Indonesian ACP lines?
1220, 1250, 1500 and 1570 mm to match standard ACP sheet sizes and minimise trim waste.
What is the lead time to Tanjung Priok?
Production 20–30 days + sea transit 10–18 days ≈ 30–48 days factory-to-port.
What payment terms do you accept?
L/C at sight and T/T (30% deposit, 70% against B/L copy), in USD.
Related
Also known as: colour coated aluminium coil, pre-painted aluminium coil (PPAL), PVDF / PE coated aluminium coil, painted aluminium coil and ACP coil — the skin material for aluminium composite panels (ACP / ACM). Whichever spelling or term your market uses, ChinaCNU Steel manufactures and exports all variants factory-direct from our Qingdao mill, FOB worldwide.